Direct Manufacturer
sales@mailerboxfactory.com
Built-In Carry Handle

Gable-Top Mailer Boxes

The box that carries itself. Two top panels fold up and lock together into a handle, so a bakery order or gift set can be handed over and carried without a separate bag, while the corrugated walls keep the contents protected.

Handle: Fold-Up, Slot-LockedBoard: Kraft or White / ECT-32Base: Tuck-LockMOQ: 500 Units
Gable Engineering

Gable Construction & Board Tolerances

A gable box is cut and creased from one sheet. The handle, the gable panels, and the tuck-lock base all come from the same dieline, so every box in the run folds the same way and locks in the same place.

Substrate / FormatCaliper / FluteClosurePrint CapabilityRecommended Industry
Kraft E-Flute Gable Box1.6 mm (32 ECT)Slot-locked fold-up handleOne or two colour print on kraftBakery, confectionery, farm shops
White B-Flute Gable Box3.2 mm (44 ECT)Slot-locked handle on a stronger wallFull-colour print on all outer panelsGift sets, meal kits, heavier carry-out
Small Gable Favour Box1.6 mm (32 ECT)Fold-up handle, hand assembledLogo and message on the gable panelsParty favours, weddings, events
Large Gable Carry Box3.2 mm (44 ECT)Reinforced handle slots for heavier loadsPrinted panels with plain handle areaPicnic kits, retail carry-out, hampers
01

One Sheet, No Separate Bag

The handle is part of the box, cut from the same sheet as the walls and base. There is no separate bag to stock, and the customer leaves with one item in hand instead of two.

02

Tuck-Lock Base

The base panels fold in sequence and lock against each other, so the box can be assembled by hand at the packing bench in seconds. Flat-packed blanks stack neatly until they are needed.

03

Sized to the Contents

The compartment is sized to what goes inside, from a single cake box layer to a full gift set, and the gable height is set on the dieline so the handle sits clear of the contents.

Request Your Direct Factory Gable-Top Quote

Get competitive wholesale rates on custom gable-top mailer boxes and panel printing direct from our factory.

Direct Factory Quoting Engine

Configure Your Custom Mailer Boxes

Wholesale tiered pricing directly from the packaging floor. Receive an engineering review and a quote within 2–4 business hours.

All dimensions refer to inside usable box space (L × W × D).

Need advice? E-Flute provides crisp fold lines and superior high-resolution printing.

Estimated Unit Price Tier$0.72 – $0.98 / box
Direct WholesaleStarts at $0.48 at 5,000+

Based on 1,000 units. Volume scale unlocks $0.48 at 5,000+ and $0.34 at 20,000+ units.

Accurate formal quote includes free digital proof and tailored freight optimization.

Free digital dieline proof included with every quote · No obligation

Gable-Top Mailer Box FAQs

Technical details on gable construction, handle locking, printing, and ECT fluting options.

Packaging FAQ

Frequently Asked Factory & Manufacturing Questions

Transparent answers on minimums, production timelines, dielines, and corrugated board specifications.

How does a gable-top mailer box close?

The two top panels fold up and meet in the middle, where die-cut slots lock together to form the carry handle. The base panels fold and tuck-lock without tape for light and medium loads; a strip of tape can be added under the base for heavier contents.

What are gable-top mailer boxes used for?

Bakery and confectionery orders, gift sets, party favours, picnic and meal kits, and retail carry-out packaging. The handle makes the box easy to hand over at a counter and easy for the customer to carry, so it often replaces a separate carrier bag.

Can I print on a gable-top mailer box?

Yes. The side and end panels print as normal in kraft, white, or a flood colour, and the gable panels above them are a natural place for a logo. Artwork is positioned on the dieline so the print stays clear of the handle slots and fold lines.

What sizes can gable-top mailer boxes be made in?

Boxes are made to your dimensions. The gable and handle add height above the main compartment, so we confirm the total folded height against your product at the dieline stage, along with the handle slot position.

What is the factory MOQ and production timeline for gable-top mailer boxes?

Our direct-from-factory production minimum is 500 units per custom size and artwork specification. Production turnaround is 7 to 10 business days following digital 3D proof sign-off, with larger runs of 2,500 to 10,000+ units benefiting from automated high-speed converting economies.

Have a technical question about board strength (ECT) ratings or dieline fitment?

Consult directly with a packaging engineer via email at sales@mailerboxfactory.com or configure your specs in our Quote Configurator.